The 3.0" Extreme Duty 6" hitch is the ultimate tool for your new 2017+ Ford Super Duty! Ford began releasing trucks with 3.0" receivers back in January of 2017, and soon after BulletProof Hitches released the 3.0" hitch. This hitch will work in 2017+ Ford F-450s and some F-350s and F-250s (please measure, as some 2017+ F-250s/F-350s have 2.5" receivers). This hitch does not require the use of any reducing sleeves and is the best match for anyone looking to have the strongest and safest connection between their Ford and their trailer! This means the hitch will not rattle or move and is much safer than using a 3.0" receiver with one or two reducing sleeves! Some RV and Semi manufacturers are now also putting 3.0" receivers on their vehicles, and the BulletProof 3.0" hitch works flawlessly in these applications. Unlike many of our competitors we use solid steel construction to ensure maximum strength and towing capacity. All of our hitches are proudly made in the USA and are rigorously tested exceeding SAE-J684 weight testing requirements. This hitch has 4 different ride heights that are easily set by pulling the two pins and moving the ball up or down. It features our own BulletProof ball rated to 2 5/16" = 36,000LBS & 2" = 12,000LBS. The edges of the steel bar are CNC chamfered for appearance and functionality making it easy to remove the hitch and install it into any receiver. The hitch comes powder coated in textured heavy duty black.
View More

The 3.0" Extreme Duty 8" hitch is the ultimate tool for your new 2017+ Ford Super Duty! Ford began releasing trucks with 3.0" receivers back in January of 2017, and soon after BulletProof Hitches released the 3.0" hitch. This hitch will work in 2017+ Ford F-450s and some F-350s and F-250s (please measure, as some 2017+ F-250s/F-350s have 2.5" receivers). This hitch does not require the use of any reducing sleeves and is the best match for anyone looking to have the strongest and safest connection between their Ford and their trailer! This means the hitch will not rattle or move and is much safer than using a 3.0" receiver with one or two reducing sleeves! Some RV and Semi manufacturers are now also putting 3.0" receivers on their vehicles, and the BulletProof 3.0" hitch works flawlessly in these applications. Unlike many of our competitors we use solid steel construction to ensure maximum strength and towing capacity. All of our hitches are proudly made in the USA and are rigorously tested exceeding SAE-J684 weight testing requirements. This hitch has 5 different ride heights that are easily set by pulling the two pins and moving the ball up or down. It features our own BulletProof ball rated to 2 5/16" = 36,000LBS & 2" = 12,000LBS. The edges of the steel bar are CNC chamfered for appearance and functionality making it easy to remove the hitch and install it into any receiver. The hitch comes powder coated in textured black.
View More

The 3.0" Extreme Duty 10" hitch is the ultimate tool for your new 2017+ Ford Super Duty! Ford began releasing trucks with 3.0" receivers back in January of 2017, and soon after BulletProof Hitches released the 3.0" hitch. This hitch will work in 2017+ Ford F-450s and some F-350s and F-250s (please measure, as some 2017+ F-250s/F-350s have 2.5" receivers). This hitch does not require the use of any reducing sleeves and is the best match for anyone looking to have the strongest and safest connection between their Ford and their trailer! This means the hitch will not rattle or move and is much safer than using a 3.0" receiver with one or two reducing sleeves! Some RV and Semi manufacturers are now also putting 3.0" receivers on their vehicles, and the BulletProof 3.0" hitch works flawlessly in these applications. Unlike many of our competitors we use solid steel construction to ensure maximum strength and towing capacity. All of our hitches are proudly made in the USA and are rigorously tested exceeding SAE-J684 weight testing requirements. This hitch has 6 different ride heights that are easily set by pulling the two pins and moving the ball up or down. It features our own BulletProof ball rated to 2 5/16" = 36,000LBS & 2" = 12,000LBS. The edges of the steel bar are CNC chamfered for appearance and functionality making it easy to remove the hitch and install it into any receiver. The hitch comes powder coated in textured black.
View More

The 3.0" Extreme Duty 12" hitch is the ultimate tool for your new 2017+ Ford Super Duty! Ford began releasing trucks with 3.0" receivers back in January of 2017, and soon after BulletProof Hitches released the 3.0" hitch. This hitch will work in 2017+ Ford F-450s and some F-350s and F-250s (please measure, as some 2017+ F-250s/F-350s have 2.5" receivers). This hitch does not require the use of any reducing sleeves and is the best match for anyone looking to have the strongest and safest connection between their Ford and their trailer! This means the hitch will not rattle or move and is much safer than using a 3.0" receiver with one or two reducing sleeves! Some RV and Semi manufacturers are now also putting 3.0" receivers on their vehicles, and the BulletProof 3.0" hitch works flawlessly in these applications. Unlike many of our competitors we use solid steel construction to ensure maximum strength and towing capacity. All of our hitches are proudly made in the USA and are rigorously tested exceeding SAE-J684 weight testing requirements. This hitch has 7 different ride heights that are easily set by pulling the two pins and moving the ball up or down. It features our own BulletProof ball rated to 2 5/16" = 36,000LBS & 2" = 12,000LBS. The edges of the steel bar are CNC chamfered for appearance and functionality making it easy to remove the hitch and install it into any receiver. The hitch comes powder coated in textured black.
View More

The Extreme Duty 4" & 6" offset hitch was designed for people that tow a wide variety of trailers. It can be used in the 4" drop and 6" rise position or flip it over and have a 6" drop and 4" rise. This hitch is great for people towing very tall trailers such as pintle equipment trailers which require the ball in a 4" rise position and small utility trailers which require the ball in a 4" drop position. With this hitch once you find the necessary drop required for your truck you can leave the hitch locked in place with no need to flip the hitch over to tow a variety of trailers. This hitch was also designed to allow the tailgate to fold down without touching the hitch on most vehicles.
View More

For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 2" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same black textured powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip. However we recommend purchasing a locking pin to keep it safe and secure.
View More

For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 2.5" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same black textured powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip, however we recommend purchasing a locking pin to keep it safe and secure.
View More

For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 3.0" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same textured epoxy powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip. However we recommend purchasing a locking pin to keep it safe and secure.
View More

The BulletProof Pintle Attachment is Precision made in-house with USA Steel on our CNC machines. This attachment turns our dual ball setup into a pintle hitch. Simply drop the loop over the top of the ball and then drop our pintle attachment in, install the supplied hardened pin and you are ready to hit the road! Rated to 36,000 lbs. with our Extreme Duty hitches.
View More

The Medium Duty 2-tang clevis attachment features a 1" pin and a 2-1/4" opening which allows connection to a lunette ring or a farm-style draw bar. This will allow you to tow farming equipment, pintle trailers, even chains and straps! The 2-tang clevis is compatible with all BulletProof Hitches. This attachment is built with solid steel and is coated with our signature black textured powder coat, just like the rest of our hitches and accessories. This product includes a 1" zinc plated pin with a large handle and two of our standard 5/8" hardened pins. Rated to 14,000lbs.
View More

The clevis attachment features a 1" pin and a 2-1/2" opening which allows connection to a lunette ring or a farm-style draw bar. This will allow you to tow farming equipment, pintle trailers, & even chains and straps! The 2-tang clevis is compatible with all BulletProof Hitches. This attachment is built with solid steel and is coated with our signature black textured powder coat.
View More

The BulletProof 2" Receiver Attachment allows you to attach 2" receiver accessories such as bike racks and cargo carriers to your BulletProof Hitch. This attachment can also be used for flat tow applications. It is rated to 10,000 lbs. gross trailer weight and 1500 lbs. tongue weight capacity. This attachment comes coated in our standard textured black powder coat and includes three heat treated / zinc plated 5/8" pins and R-clips.
View More

View More

View More

View More

Smittybilt 10" Drop Ball Hitch Mount
View More

Smittybilt 2" Drop Ball Hitch Mount
View More

Smittybilt 2" Receiver Ball
View More

Smittybilt 4" Drop Ball Hitch Mount
View More

Smittybilt 6" Drop Ball Hitch Mount
View More

Smittybilt 8" Drop Ball Hitch Mount
View More

Smittybilt Adjustable 6" Drop Ball Mount w/ 2" & 2-5/16" Steel Balls
View More

Smittybilt Adjustable 6" Drop Ball Mount w/ 2"& 1-7/8" Steel Balls
View More

Smittybilt Aluminum 10" Drop Ball Mount
View More

Smittybilt Aluminum 2" Drop Ball Mount
View More

Smittybilt Aluminum 4" Drop Ball Mount
View More

Smittybilt Aluminum 6" Drop Ball Mount
View More

Smittybilt Aluminum 8" Drop Ball Mount
View More

Custom installation kit for 5th Wheel hitches that use univeral mounting rails in your truck bed. - Custom installation brackets mount beneath your truck bed to provide attachment points for 5th Wheel hitch rails
View More

Custom installation kit for 5th Wheel hitches that use univeral mounting rails in your truck bed. - Custom installation brackets mount beneath your truck bed to provide attachment points for 5th Wheel hitch rails
View More