Showing
19 of 19 Products
- 30
Sort by:
Hitch Adapters & Clamps
TRIMAX Hitch Adapter Sleeve Converts All 2" Hitches To 2-1/2" Receivers
Click Description Below for Additional Information
View More
TRIMAX Hitch Adapter Sleeve Converts All 2" Hitches To 2-1/2" Receivers
Click Description Below for Additional Information
TRIMAX Hitch Adapter Sleeve Converts All 2.5" Hitches To 3" Receivers
Click Description Below for Additional Information
View More
TRIMAX Hitch Adapter Sleeve Converts All 2.5" Hitches To 3" Receivers
Click Description Below for Additional Information
TRIMAX Univeral Anti-Rattle Clamp Fits 2" Hitch
Click Description Below for Additional Information
View More
TRIMAX Univeral Anti-Rattle Clamp Fits 2" Hitch
Click Description Below for Additional Information
TRIMAX Universal Anti-Rattle Clamp Fits 2-1/2" Hitch
Click Description Below for Additional Information
View More
TRIMAX Universal Anti-Rattle Clamp Fits 2-1/2" Hitch
Click Description Below for Additional Information
For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 2" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same black textured powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip. However we recommend purchasing a locking pin to keep it safe and secure.
View More
View More
For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 2" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same black textured powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip. However we recommend purchasing a locking pin to keep it safe and secure.
For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 2.5" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same black textured powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip, however we recommend purchasing a locking pin to keep it safe and secure.
View More
View More
For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 2.5" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same black textured powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip, however we recommend purchasing a locking pin to keep it safe and secure.
For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 3.0" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same textured epoxy powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip. However we recommend purchasing a locking pin to keep it safe and secure.
View More
View More
For the times when you must attach a rope, strap or chain to your truck, it's important to find the strongest possible point on the vehicle. The Extreme Duty 3.0" BulletProof receiver shackle solves that problem by giving you a solid steel shank and a 1-1/4" shackle to attach the tether to your vehicle. This shackle features four different pin holes to allow the user to set the shackle where they need to. The design allows it to be used in both horizontal and vertical orientations and can be used in extended or recessed positions. For vehicles with stock bumpers this allows more of the shank in the receiver opening. However if your vehicle has accessories like aftermarket bumpers where the shackle must protrude more from the receiver opening, the secondary pin holes towards the rear of the shank can be used which will allow the shackle to extend an extra 1-1/2". The receiver shackle features the same textured epoxy powder coat as our hitches and is rated to 30,000 pounds. This accessory comes standard with one hardened pin and R-clip. However we recommend purchasing a locking pin to keep it safe and secure.
A Reducer Sleeve with a Positive Stop when it is installed. No need to align the holes for your receiver pin. - Adapter reduces a 2.5" x 2.5" hitch receiver opening to 2" x 2"
View More
View More
A Reducer Sleeve with a Positive Stop when it is installed. No need to align the holes for your receiver pin. - Adapter reduces a 2.5" x 2.5" hitch receiver opening to 2" x 2"
A Reducer Sleeve with a Positive Stop when it is installed. No need to align the holes for your receiver pin. - Adapter reduces a 3" x 3" hitch receiver opening to 2.5" x 2.5"
View More
View More
A Reducer Sleeve with a Positive Stop when it is installed. No need to align the holes for your receiver pin. - Adapter reduces a 3" x 3" hitch receiver opening to 2.5" x 2.5"
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 2 position
- 6 hole size
- 9 in. shank length
- Made in the USA
View More
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 2 position
- 6 hole size
- 9 in. shank length
- Made in the USA
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 3 position
- 8 hole size
- 9 in. shank length
- Made in the USA
View More
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 3 position
- 8 hole size
- 9 in. shank length
- Made in the USA
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 3 position
- 8 hole size
- 11 in. shank length
- Made in the USA
View More
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 3 position
- 8 hole size
- 11 in. shank length
- Made in the USA
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 6 position
- 14 hole size
- 13 in. shank length
- Made in the USA
View More
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 6 position
- 14 hole size
- 13 in. shank length
- Made in the USA
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 6 position
- 14 hole size
- 15 in. shank length
- Made in the USA
View More
- Universal application
- For 2 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 6 position
- 14 hole size
- 15 in. shank length
- Made in the USA
- Universal application
- For 2.5 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 3 position
- 8 hole size
- 9 in. shank length
- Made in the USA
View More
- Universal application
- For 2.5 inch receivers
- Black powder coat
- 16,000 lbs GTW
- 1,600 lbs VTW
- 3 position
- 8 hole size
- 9 in. shank length
- Made in the USA
B&W Tow & Stow Drawbar Attachment for 2" shank Tow & Stow hitches - Clevis adapter attaches to your B&W Tow & Stow 2" ball mount so that you can tow a trailer that has a clevis
View More
View More
B&W Tow & Stow Drawbar Attachment for 2" shank Tow & Stow hitches - Clevis adapter attaches to your B&W Tow & Stow 2" ball mount so that you can tow a trailer that has a clevis
B&W Tow & Stow Drawbar Attachment for 2-1/2" shank Tow & Stow hitches - Clevis adapter attaches to your B&W Tow & Stow 2" ball mount so that you can tow a trailer that has a clevis
View More
View More
B&W Tow & Stow Drawbar Attachment for 2-1/2" shank Tow & Stow hitches - Clevis adapter attaches to your B&W Tow & Stow 2" ball mount so that you can tow a trailer that has a clevis
B&W Tow & Stow Drawbar Attachment for 3" shank Tow & Stow hitches - Clevis adapter attaches to your B&W Tow & Stow 2" ball mount so that you can tow a trailer that has a clevis
View More
View More
B&W Tow & Stow Drawbar Attachment for 3" shank Tow & Stow hitches - Clevis adapter attaches to your B&W Tow & Stow 2" ball mount so that you can tow a trailer that has a clevis
D-Rings | One Pair
View More
View More
D-Rings | One Pair
19 of 19 Products
join our
email listYou’ll be first to know about Truck Restylers products, discounts and specials!
- Need Help? ASK ONE OF OUR EXPERTS:
- 833-693-9322
- [email protected]
Part# TAS25